Validation of the GfL report on external risk at Basel Airport by the FOCA/BAZL
February 2026 | Customer: Swiss Federal Office of Civil Aviation (FOCA/BAZL) | Safety Assessment
The GfL report “Risk Analysis of External Risks at Basel-Mulhouse Airport (EuroAirport)” and the underlying assessment methodology were reviewed and validated by the Federal Office of Civil Aviation (FOCA/BAZL).
Risk Analysis for External Risks at EuroAirport Basel
February 2026 | Customer: Canton of Basel-Stadt, Canton of Basel-Landschaft | Safety Assessment
On behalf of the cantons of Basel-Stadt and Basel-Landschaft, GfL conducted a comprehensive risk analysis of external risks associated with air traffic at EuroAirport Basel (EAP). The goal of the analysis was to assess the risks to the local population outside the airport grounds in a transparent and scientifically sound manner.
ACM, SMS and DAM Tools in use at NRN Airport
December 2025 | Customer: Weeze Airport | Software
At Weeze Airport, the individually implemented airport management tools 'Airport Compliance Monitor', 'Safety Management System' and 'Digital Aerodrome Manual' are in daily operational use
Saxon authorities use ACM for Authorities for oversight duties
July 2025 | Customer: The Saxon Ministry of Infrastructure and Regional Development (SMIL) | Software
The Saxon State Ministry for Infrastructure and Regional Development (SMIL) performs its oversight duties of Dresden and Leipzig/Halle Airports with the Airport Compliance Monitor (ACM) for authorities.
SMS-Tool in use at HHN Airport
May 2025 | Customer: Hahn Airport | Software
At Hahn Airport, the individually implemented tool 'Safety Management System' is in daily operational use
Development of version 2.6.2 of the Advanced Emission Model (AEM) 2.6
April 2025 | Customer: European Organisation for the Safety of Air Navigation (EUROCONTROL) | Software
Development of version 2.6.2 of the AEM based on C++ 2017, which includes improved calculation methods for nitrogen oxide emissions (according to ICAO CAEP), emissions during ground taxiing, as well as emission merging and better support for the Apache Parquet data format.
Ground Handler uses ACM for compliance documentation for PART-GH
February 2025 | Customer: Hannover Aviation Ground Services GmbH (AGS) | Software
The subcontractor Aviation Ground Services (AGS) was integrated into the airport's established ACM HAJ and have since been using this system to demonstrate their compliance with the new EU/EASA regulations (Regulation (EU) 2025/20, PART-(OR)GH) for ground handling service providers (GHSP).
Obstacle Assessment for Photovoltaics Along Departure Runway 18 West
March 2024 | Customer: Frankfurt Airport | Safety Assessment
GfL supported the approval process under aviation law by providing expert opinions to determine the required lateral distance of the facility from the runway centerline in light of the EASA requirements for runway strip width and the technical characteristics of the PV plant itself.
SMS and SecMS Tool in use at LEJ Airport
November 2023 | Customer: Leipzig/Halle Airport | Software
At the airport Leipzig-Halle, the individually implemented tools 'Safety Management System' (incl. ECCAIRS2-Interface) and 'Security Management System' are in daily operational use
SMS and SecMS Tool in use at DRS Airport
November 2023 | Customer: Dresden International Airport | Software
At the airport Dresden, the individually implemented tools 'Safety Management System' (incl. ECCAIRS2-Interface) and 'Security Management System' are in daily operational use
Study on the optimisation of approach procedures at Leipzig/Halle Airport
August 2023 | Customer: Free State of Saxony | Environment
Investigation of the possible reactivation of the point-merge procedure at Leipzig/Halle Airport under important constraints such as aircraft noise and CO2 emissions.
flight profile analysis tool ETAS 3.1
April 2023 | Customer: DFS Deutsche Flugsicherung GmbH | Software
DFS uses ETAS (Enhanced Trajectory Analysis System) version 3.1 within the framework of the "Arbeitsgemeinschaft Optimiertes Fliegen" ("Optimised Flying Group") to investigate and assess the flight-specific fuel consumption for airlines represented in the group.
ACM and DAM Tools in use at SCN airport
February 2023 | Customer: Flughafen Saarbrücken | Software
At the airport Saarbrücken, the individually implemented airport management tools 'Airport Compliance Monitor', 'Safety Management System' and 'Digital Aerodrome Manual' are in daily operational use
ACM and SMS Tools in use at DUS Airport
January 2023 | Customer: Düsseldorf Airport | Software
At the airport Düsseldorf, the individually implemented airport management tools 'Airport Compliance Monitor' and 'Safety Management System' (incl. ECCAIRS2-Interface) are in daily operational use
ACM, SMS and DAM Tools in use at BWE airport
November 2022 | Customer: Braunschweig Wolfsburg Airport | Software
At the airport Braunschweig-Wolfsburg, the individually implemented airport management tools 'Airport Compliance Monitor', 'Safety Management System' (incl. ECCAIRS2-Interface) and 'Digital Aerodrome Manual' are in daily operational use
Passenger simulation at the London City Airport (LCY)
November 2022 | Customer: Single European Sky ATM Research (SESAR) | Airport Planning
Passenger simulation at the London City Airport (LCY) in the research project IMHOTEP, in which the effects of disruptions during the aircraft turnaround process on passenger flows in the terminal were investigated.
ACM, SMS and DAM Tools in use at HAJ airport
September 2022 | Customer: Hannover Airport | Software
At the airport Hannover-Langenhangen, the individually implemented airport management tools 'Airport Compliance Monitor' , 'Safety Management System' (incl. ECCAIRS2-Interface) and 'Digital Aerodrome Manual' are in daily operational use
Risk Analysis of Simultaneous Operations at the Grass Runway and Taxiway M at Freiburg Airport
July 2022 | Customer: City of Freiburg im Breisgau | Safety Assessment
Determination and evaluation of collision risks between a landing glider on the grass runway and taxiing or stationary aircraft on the parallel taxiway, due to ICAO/EASA violations (minimum separation)
Assessment on noise effects of different take-off procedures at Frankfurt/Main Airport
June 2022 | Customer: Gemeinnützige Umwelthaus GmbH | Environment
Investigation of the noise reduction potential of the take-off procedures NADP1 and NADP2, as well as varying flight operational parameters, by means of flight performance calculations based on climb profiles according to ECAC Doc 29 converted into AzB-compliant fixed point profiles.
Development of version 2.6 of the Advanced Emission Model (AEM) 2.6
May 2022 | Customer: European Organisation for the Safety of Air Navigation (EUROCONTROL) | Software
Development of version 2.6 of the AEM tool, based on C++ 2017. The new version implements the new ICAO non-volatile particulate matter (nvPM) calculation method and supports multiplatform (Windows/Linux) and multicore processing.
